Repair Hydraulic, Breaker Services

Tool Holder / Front Head

Cracked Heads

Due to dry firing, prying, or improper use.

Not A Problem!!

At Hydraulic Breaker Services we specialize in refurbishing cracked front heads, whether just small hair line cracks or completely cracked in two. We also stock a wide range of used and rebuilt tool holders and front heads.

Explanation of Program

Shortly after arrival, your breaker is disassembled and fully inspected. A detailed estimate of parts and services is prepared and sent to you for your approval. Once authorized to proceed, we typically have the breaker ready to ship back to you in 5-7 working days.

Breaker reconditioning includes the following:

The main body is removed from the outer bracket and separated into front tool holder section, N2 (back cap) section and cylinder sections. Many cylinder sections include an accumulator - this is removed from the cylinder and put aside for inspection.

After removal of all interior and exterior components from the cylinder section, the original factory machining access plugs are removed and the cylinder section is sent out to be dipped. Removing the machining access plugs insures that no contamination remains lodged in the internal passages (most shops rebuilding breakers do not thoroughly cleanse the cylinder section therefore future seals life is shortened). After return to our shop, new access plugs are installed in the cylinder section and it is ready to be rebuilt.

All new seals are added to the cylinder body, control valve body and BPM adjuster case assemblies and the piston and upper seal carriers are reinstalled. At this point the original piston has been inspected and either reworked per factory service procedures or replaced with a new one. The main body accumulator, having been inspected and rebuilt with a new bladder, is reinstalled on the main cylinder and new upper and lower bushings have been installed in the tool holder section. N2 section, cylinder section and tool holder sections are reassembled and all fasteners are brought up to factory torque specs. Machinery quality paint is applied.

All Hydraulic Hammer Shops are NOT created equal!

24 Hour Turnaround Service

Unlike most hydraulic shops, HBS offers complete machine shop services. With our knowledge and capabilities to rebuild worn or cracked parts like Pistons, Cylinders, Front Heads, back to size allowing HBS to save your company the high cost of new replacement parts. We also stock a wide range of used parts available for core exchange.

CERTIFIED REBUILT BREAKERS

All of Hydraulic Breaker Services’ certified rebuilt breakers are completely gone through from top to bottom. The Piston, Cylinder, Front and Back Heads, Upper and Lower Bushings, Tie Rods, Seals, Diaphragm, Hoses are all replaced and rebuilt to factory standards. We concentrate on the nine major manufacturers: ALLIED/RAMMER, ATLAS COPCO, BTI, CATERPILLAR, INDECO, KENT, NPK, STANLEY, TRAMAC/MONTABERT, Unlike other hammer dealers, we back every certified rebuilt breaker with a six-month warranty and we offer customer support on every hammer sold. So before paying the high price of a brand new breaker, why not consider a Certified Rebuilt Breaker from HBS?